1960s dress fashion Vintage Flowers Floral Lapel Button up Long Sleeve Mini with Pocket Orange loop:vaedaribbedtiedress Size:4T --- Chest = 23 inches/ Waist = 22 inches/ Hollow to floor = 38 inches Slight Stretch Button Mermaid Muse Aqua Cotton

1960s dress fashion Vintage Flowers Floral Lapel Button up Long Sleeve Mini with Pocket Orange loop:vaedaribbedtiedress Size:4T --- Chest = 23 inches/ Waist = 22 inches/ Hollow to floor = 38 inches Slight Stretch Button Mermaid Muse Aqua Cotton

Mermaid Muse Aqua Cotton High-Lo Maxi Dress Mint / 2T/3T

Lace trim under bust detail

loop:vaedaribbedtiedress

Size:4T --- Chest = 23 inches/ Waist = 22 inches/ Hollow to floor = 38 inches

Note: This list may contain affiliate links (1) ¾” x 4′ x 8′ Plywood to make the Large Drawers, Side Panels, and Top (1) ½” x 4′ x 8′ Plywood to make the Small Drawers and Panels in the Drawer Fronts and the Backing (5) 1 x 4 x 8′ Boards to make the Back Rails and Top (2) 2 x 2 x 8′ Boards to make the Legs and Rail (8) 1 x 2 x 8′ Boards to make the Rails and Stiles and the Frames of the Drawer Fronts (14) 3/8 x 3/8 x 36″ Square Dowels to make the Drawer Cleats (2) 1 x 3 x 6′ Board to make the Topper (optional) 1¼-inch Coarse Thread Pocket Hole Screws 1 inch Coarse Thread Pocket Hole Screws ¾-inch Finish Nails to attach the Padding Strips to the Side Panels (6) ¾-inch Wood Screws to attach the Drawer Faces to the Small Drawer Boxes (8) 1-inch Wood Screws to attach the Drawer Faces to the Large Drawer Boxes (2) 3-inch Metal Plates to secure the optional Topper (2) Furniture Anti-Tip Straps (7) 16-inch Drawer Slides Sets Body 2 x 2 Legs – 4 @ 30¾ inches 1 x 2 Rails – 5 @ 53 inches 2 x 2 Rails – 1 @ 53 inches 1 x 2 Stiles – 2 @ 6¾ inches 1 x 2 Stiles – 2 @ 8½ inches 1 x 2 Side Rails – 4 @ 15¼ inches 1 x 4 Back Rails – 3 @ 53 inches 1 x 4 Supports – 4 @ 16 3/8 inches ½-inch Plywood Drawer Slide Padding – 6 @ 1½”H x 15¼”W Top 1 x 4 Frame Top – 2 @ 19 inches (miter ends at 45-degrees) 1 x 4 Frame Top – 2 @ 57½ inches (miter ends at 45-degrees) ¾-inch Plywood Top – 1 @ 50½” x 12″ Topper 1 x 3 Topper Ends – 2 @ 16½ inches 1 x 3 Topper Front and Back – 2 @ 33½ inches Small Drawer Boxes ½-inch Plywood Small Drawer Sides – 6 @ 6¼”H x 16″W ½-inch Plywood Small Drawer Fronts and Backs – 6 @ Cut to fit 6¼”H x 2-inches less than the width of opening 3/8 Square Dowel Cleats – 6 @ 14½ inches 3/8 Square Dowel Cleats – 6 @ Cut to fit Width of Drawer Fronts and Backs Large Drawer Boxes ¾-inch Plywood Large Drawer Sides – 8 @ 8″H x 16″W ¾-inch Plywood Large Drawer Fronts and Backs – 8 @ Cut to fit 8″H x 2½-inches less than the width of opening 3/8 Square Dowel Cleats – 6 @ 14½ inches 3/8 Square Dowel Cleats – 6 @ Cut to fit Width of Drawer Fronts and Backs Small Drawer Fronts 1 x 2 Small Drawer Front Frames Top and Bottom – 6 @ Cut to fit ¼ inch less than the width of opening 1 x 2 Small Drawer Front Frames Sides – 6 @ 3½ inches ½-inch Plywood Small Drawer Front Panels – 3 @ Cut to Fit inside Frame Large Drawer Fronts 1 x 2 Large Drawer Front Frames Top and Bottom – 8 @ Cut to fit ¼ inch less than the width of opening 1 x 2 Large Drawer Front Frames Sides – 8 @ 5¼ inches ½-inch Plywood Large Drawer Front Panels – 4 @ Cut to Fit inside Frame Backing ½-inch Plywood – 1 @ 53″W x 27½”H Steps 1

Slight Stretch Button